Installed reflective covering on interior of lower cowling. Installed air vent flexible ducts.
Time: 4 hours.
Blog
Avionics Panel Complete
Installed all of the Avionics Units and tested installation. All working!
OAT Connection and GMU22 Bracket
Connected OAT sensor to GSU25. Fabricated and installed bracket for GMU 22.
Time: 4 hours.
ELT Bracket and AHRS Mount
Installed bracket for ELT with rivnuts. Installed GSU25 on bracket.
Time: 4 hours.
OAT Sensor and ELT Switch
Installed OAT Sensor. Installed ELT Remote Switch.
Time: 3 hours.
Support Angles for Avionics Racks
Installed angles on sub-panel to support GNX375 rack. Riveted support angles to Instrument Panel for racks.
Time: 5 hours.
Sub-Panel Mods
Cut sub-panel to permit racks from GNX375 and GTR200 to pass through.
Autopilot Faceplate Adapter
Fabricated reduction faceplate for GMC507.
Time: 4 hours.
Angles for Install Racks
Fabricated mounting angles for GNX375 and GTR200 install racks.
Time: 6 hours.
PMAG and Magneto Wiring
Secured wiring for sensors and wired PMAG and Slick Magneto.
Time: 4 hours.
Leonard's RV-7A Build 