The N-Number decal was applied to both sides of the rudder.


Time: 2 hours.
The N-Number decal was applied to both sides of the rudder.


Time: 2 hours.
Designed, fabricated and installed aileron pushrod boots to prevent drafts into the cabin.

Time: 6 hours.
Designed and fabricated Control Stick Boots and installed them with Velcro to the cabin floor.


Time: 8 hours.
Installed rest of fuselage, canopy, corrected paint in front top and spinner.
Time: 3 hours.
Installed interior of cockpit, rugs, floor, baggage wall.



Time: 4 hours.
Installed elevators, rudder, pushrod, repaired primer rear fuselage interior.
Time: 4 hours.
Painted canopy rail white, reprimed seat back support, removed overspray on engine.
Time: 4 hours.
After masking and preparation was complete the blue and turquoise paint was applied to the wings, empennage, cowl and wheel pants.
Time: 6 hours.
Masking was done for the blue areas and for the turquoise stripes on the empennage, cowl, wings and wheel pants.







Time: 8 hours.
After preparation the turquoise paint stripes were applied to the fuselage.


Time: 6 hours.