Setting the Wing Incidence – 5

I installed the WD-610 control column, WD-611/WD-612 control sticks, and F-665 control column pushrod as shown on DWG 38. I used the W-730 bellcrank jig to hold the WD-421 bellcrank in its neutral position as shown on DWG 15A. I installed and adjusted the W-818 aileron-to-bellcrank pushrod such that the aileron was in the neutral position when the bellcrank was held in its neutral position. I installed and adjusted the W-716 bellcrank-to-stick pushrod such that the sticks were in their neutral positions (vertical) when the bellcrank was held in its neutral position.

Time: 4 hours.